No. | Brand | L | r | B | C | f | c | E | b |
IRR-1-1/4-4 | SMITH | - | - | 25,4 mm | 25,4 mm | - | - | - | - |
IRR-7/16 | SMITH | - | - | - | - | - | - | - | - |
MCR-80-C | SMITH | - | - | - | - | - | - | - | - |
HR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
FYR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
MVCR-100 | SMITH | - | - | - | - | - | - | - | - |
CR-9/16-X | SMITH | - | - | - | - | - | - | - | - |
CR-1-XBEC | SMITH | - | - | 85 mm | 70 mm | - | - | - | - |
MCRV-22-SBC | SMITH | - | - | - | - | - | - | - | - |
DYR-6 | SMITH | - | - | 17 mm | - | - | - | - | - |
MYRV-6-C | SMITH | - | - | - | - | - | - | - | - |
MYR-12-S | SMITH | 100 mm | - | - | - | - | - | - | - |
MCR-13-C | SMITH | - | - | - | - | - | - | - | - |
HR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
FCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
MCR-52-SBC | SMITH | - | - | - | - | - | - | - | - |
CR-11/16-BC | SMITH | - | - | - | 25,4 mm | - | - | - | - |
MCR-26-SB | SMITH | - | - | - | - | - | - | - | - |
IRR-1-1/16 | SMITH | - | - | 48 mm | 48 mm | - | - | - | - |
PCR-4-E | SMITH | - | - | - | - | - | - | - | - |
SMITH MCRV-26-BC Cam Follower and Track Roller - Stud Type | Nlim (oil):10,500 rpm; Size (mm):130x200x33; D1:177.42 mm; rs min:2 mm; d:130 mm; Characteristic inner ring frequency, BPFI:11.77 Hz; Precision class:P4; Characteristic outer ring frequency, BPF0:9.23 Hz; Preload value:0.94 kN; Contact angle α:15 °; |
SMITH MYR-30 Cam Follower and Track Roller - Yoke Type | Weight:81.600 kg; da (min):258 mm; Center Guidance:Fixed Inner Ring Rib; Fillet Radius/Chamfer:4 mm; Hole Diameter (do):12 mm; Da (max):382 mm; D:400 mm; Limiting Speed - Oil:1,200 rpm; Axial Load Factor Y0:1.65; Roller Profile:Symmetric; |
SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type | Size (mm):120x180x85; r1 min.:1 mm; B:85 mm; Brand:NTN; C:70 mm; Width (mm):85; Bearing number:SA1-120B; d1:135,6 mm; r2 min.:1 mm; D:180 mm; |
SMITH MPCR-50 Cam Follower and Track Roller - Stud Type | Basic static load rating (C0):0,227 kN; Bore Diameter (mm):4; B:4 mm; C:4 mm; Outer Diameter (mm):9; D:9 mm; Basic dynamic load rating (C):0,641 kN; Width (mm):4; Size (mm):4x9x4; Bearing number:684-2Z; |
SMITH HR-1-3/4-X Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):500; B1:216 mm; T:224 mm; Width (mm):224; r min.:95 mm; Da(max):750; d:500 mm; r(min):9.5; (Refer.)Mass(kg):562; A:290 mm; |
SMITH CR-9/16-X Cam Follower and Track Roller - Stud Type | (Grease) Lubrication Speed:17 000 r/min; D:110 mm; ra max.:1 mm; (Oil) Lubrication Speed:26 000 r/min; rb max.:0,3 mm; r1 min.:1 mm; Da max.:105 mm; C2:2,7 mm; a:35 mm; Db max:105 mm; |
SMITH MCR-52-C Cam Follower and Track Roller - Stud Type | C:67 mm; Bore Diameter (mm):90; Brand:ISO; Size (mm):90x140x67; B:67 mm; d:90 mm; D:140 mm; Width (mm):67; Outer Diameter (mm):140; Bearing number:NNF5018 V; |
SMITH YAD-03 Cam Follower and Track Roller - Yoke Type | Shaft Size:5-7/16 in; Bearing - Housing - Seal:MSE507BRHKPS; Dimension B:11.0 in; Dimension H:2.4 in; Note:This product line wa; Maximum Speed:1450 rpm; Bearing Type:Split Cylindrical Re; Support Type:Take-Up; Dimension N:19.8 in; Seal Type:Kevlar Packing Seal; |
SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | d1:75.64 mm; Basic dynamic load rating - C:52.7 kN; Basic dynamic load rating C:52.7 kN; d2:87.6 mm; Mass complete bearing:1.2 kg; Hexagonal key size for grub screw - H:3 mm; d:61.912 mm; Hexagonal key size for grub screw N:3.05 mm; Calculation factor - f0:14; Calculation factor f0:14; |
SMITH CR-9/16-XB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):15,2 kN; Bc:13 mm; Brand:Timken; Ew:37 mm; Outer Diameter (mm):37; Weight:0,018 Kg; (Grease) Lubrication Speed:8700 r/min; Bearing number:K32X37X13; Bore Diameter (mm):32; Fw:32 mm; |
SMITH BCR-1-1/2-X Cam Follower and Track Roller - Stud Type Video