| SMITH BYR-1-3/4-XC Cam Follower and Track Roller - Yoke Type | Bearing number:625968; D:480 mm; Width (mm):350; Brand:NTN; Bore Diameter (mm):340; Size (mm):340x480x350; T:350 mm; d:340 mm; Outer Diameter (mm):480; |
| SMITH MPCR-90 Cam Follower and Track Roller - Stud Type | Support Type:Take-Up; Note:This product line wa; Dimension Y:0.5 in; Dimension N:6.8 in; Bearing UPC:013992057785; Dimension U:0.2 in; Cor - Static Load Rating:15287 lbf; Shaft Size:1-3/16 in; Series Type:Light Series; Dimension H:1.1 in; |
| SMITH MYR-25 Cam Follower and Track Roller - Yoke Type | Bore Size:30 mm; Radial Clearance:0.005 to 0.020 mm; Outside Diameter:55 mm; da (min):35 mm; Static Load Rating:8,300 N; Size (mm):30x55x13; B:13 mm; D:55 mm; Basic static load rating (C0):8,3 kN; Width (mm):13; |
| SMITH CR-2-XB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):61 kN; Bore Diameter (mm):25; a:16 mm; D:62 mm; r1 min.:1,5 mm; C:20 mm; d:25 mm; da max:33 mm; r2 min.:1,5 mm; r3 min.:1,5 mm; |
| SMITH YAG-12 Cam Follower and Track Roller - Yoke Type | Bore Diameter (mm):95; C:29,5 mm; D:145 mm; Width (mm):32; Size (mm):95x145x32; r2 min.:0,6 mm; d:95 mm; Brand:ISB; dk:130 mm; s:8 mm; |
| SMITH HR-1/2-C Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):721 kN; T:60 mm; Bearing number:30238 A; Brand:CX; D:340 mm; Weight:24 Kg; C:46 mm; Bore Diameter (mm):190; (Grease) Lubrication Speed:950 r/min; Outer Diameter (mm):340; |
| SMITH BCR-1-7/8-B Cam Follower and Track Roller - Stud Type | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:7780 lbf; G2 - Heat Generation Factor (Rib-Roller End):8; R - Cone Backface To Clear Radius3:0.03 in; Design Units:Imperial; da - Cone Frontface Backing Diameter:1.44 in; Cage Type:Stamped Steel; a - Effective Center Location4:-0.37 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:30000 lbf; G1 - Heat Generation Factor (Roller-Raceway):19.3; |
| SMITH MCR-30-SB Cam Follower and Track Roller - Stud Type | D:130 mm; da max:73 mm; 2B:62 mm; e:0,83; rb max:2,5 mm; d:60 mm; Bore Diameter (mm):60; Cur:40500 N / Fatigue li; Brand:FAG; Outer Diameter (mm):130; |
| SMITH MYRV-8-SC Cam Follower and Track Roller - Yoke Type | D:320 mm; d:180 mm; Calculation factor (Y0):1,92; (Grease) Lubrication Speed:1100 r/min; Basic dynamic load rating (C):1320 kN; Size (mm):180x320x112; Brand:KOYO; (Oil) Lubrication Speed:1400 r/min; Width (mm):112; C:112 mm; |
| SMITH MCR-13-C Cam Follower and Track Roller - Stud Type | Limiting Speed - Grease:3,700 rpm; da min.:124 mm; Outer Diameter (mm):240; Dynamic Load Rating:385,000 N; Da max.:233 mm; r1 min.:1.1 mm; (Grease) Lubrication Speed:3700 r/min; Angle (α):15 °; Configuration:Duplex; 2B:100 mm; |