| SMITH BCR-1-1/2-X Cam Follower and Track Roller - Stud Type | Y2 - ISO Factor10:3.02; D:16.9970 in; Bearing Weight:185.60 lb; T - Bearing Width across Cups:5.7188 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:49700 lbf; Cone Part Number:HM252340D; R - Cone Frontface To Clear Radius1:0.140 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:587000 lbf; |
| SMITH IRR-1-1/4-4 Roller Bearings | Bearing number:RXLS 5.1/2; d:139,7 mm; C:25,4 mm; B:25,4 mm; D:190,5 mm; Width (mm):25,4; Brand:SIGMA; Bore Diameter (mm):139,7; Size (mm):139.7x190.5x25.4; Outer Diameter (mm):190,5; |
| SMITH CR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | Width (mm):36; Weight:2,8 Kg; S2:1,7 mm; r1 min.:2 mm; Outer Diameter (mm):150; Basic dynamic load rating (C):315 kN; da max:120 mm; Bearing number:C2217KV; D1:133 mm; ra max.:2 mm; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Dimension J1 :14-1/2 in; Dimension M :4-3/4 in; Shaft Size:4 in; Series Type:Light Series; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x 3/4; Seal Type:Viton Single Lip; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H :4-15/16 in; Dimension J2 :12-19/32 in; |
| SMITH BCR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C:26,195 mm; Size (mm):101.6x157.162x36.512; B:36,116 mm; Brand:ISO; D:157,162 mm; Bearing number:52401/52618; Width (mm):36,512; a:0,3 mm; d:101,6 mm; Bore Diameter (mm):101,6; |
| SMITH MCRV-62-SB Cam Follower and Track Roller - Stud Type | Width (mm):68; Outer Diameter (mm):250; (Grease) Lubrication Speed:1000 r/min; Size (mm):140x250x68; D:250 mm; Brand:FBJ; B:68 mm; Basic dynamic load rating (C):525,8 kN; Bearing number:22228K; d:140 mm; |
| SMITH PCR-1-1/8-E Ball Bearings | Characteristic cage frequency, FTF:0.38 Hz; snap ring included:With Snap Ring; a max:3.28 mm; overall width:25 mm; Db min:108 mm; Da max.:92 mm; fillet radius:1.5 mm; (Oil) Lubrication Speed:8 200 r/min; Characteristic inner ring frequency, BPFI:4.94 Hz; |
| SMITH HR-1-3/4-X Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):500; B1:216 mm; T:224 mm; Width (mm):224; r min.:95 mm; Da(max):750; d:500 mm; r(min):9.5; (Refer.)Mass(kg):562; A:290 mm; |
| SMITH HR-2-3/4-X Cam Follower and Track Roller - Stud Type | Basic static load rating (C0):499 kN; d1:73 mm; d:70 mm; r min.:2 mm; (Grease) Lubrication Speed:980 r/min; Brand:FBJ; Bore Diameter (mm):70; Weight:5,72 Kg; D:150 mm; Outer Diameter (mm):150; |
| SMITH YR-2-1/2 Cam Follower and Track Roller - Yoke Type | Da max.:30 mm; Basic static load rating (C0):2,64 kN; Bearing number:6804-2NSE; D:32 mm; d:20 mm; Outer Diameter (mm):32; Size (mm):20x32x7; da min.:22 mm; Basic dynamic load rating (C):4 kN; ra max.:0.3 mm; |