| SMITH IRR-13/16-2 Roller Bearings | Design Units:Imperial; Bearing Weight:2.51 lb; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8390 lbf; Y1 - ISO Factor9:1.12; Cg - Geometry Factor11:0.0686; r - Cup Frontface To Clear Radius2:0.06 in; Ab - Cage-Cone Frontface Clearance:0.12 in; e - ISO Factor8:0.6; D:2.9375 in; Aa - Cage-Cone Backface Clearance:0.09 in; |
| SMITH HR-2-3/4-XC Cam Follower and Track Roller - Stud Type | Thread G:M140x2; D3:180 mm; L:131.00 mm; Locknut:KM28; C:24 mm; Appropriate Hydraulic Nut:HMV28; Weight:5.55 Kg; d1:125.00 mm; Lockwasher and Lockplates:MB28; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | Total Length L:209.6 mm; Bolt Hole Width N:19.00 mm; Bearing Number:G1107KRRB; Bearing Type:Ball Bearing; Dimension B1:2.016 in; Center of Bearing from End S:18.7 mm; Dimension T:1.315 in; Inside Ring Width B:=Bearings1_Inside Ri; Dimension L1:69.9 mm; Shaft Size d:1 7/16 in; |
| SMITH MCR-40-SBC Cam Follower and Track Roller - Stud Type | A:0,014 / Factor min.; Brand:FAG; ra max:0,6 mm; Outer Diameter (mm):55; D1:32 mm; D2:42 mm; Ca:25000 N / Dynamic lo; T1:20 mm; R:45 mm; Cua:2040 N / Fatigue li; |
| SMITH HR-3-1/2-B Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):20,000; Bearing number:PK20X26X13.8; Ew:26,000 mm; Outer Diameter (mm):26,000; Brand:NTN; Fw:20,000 mm; Bc:13,800 mm; |
| SMITH YAG-12 Cam Follower and Track Roller - Yoke Type | Bore Diameter (mm):95; C:29,5 mm; D:145 mm; Width (mm):32; Size (mm):95x145x32; r2 min.:0,6 mm; d:95 mm; Brand:ISB; dk:130 mm; s:8 mm; |
| SMITH BCR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C:26,195 mm; Size (mm):101.6x157.162x36.512; B:36,116 mm; Brand:ISO; D:157,162 mm; Bearing number:52401/52618; Width (mm):36,512; a:0,3 mm; d:101,6 mm; Bore Diameter (mm):101,6; |
| SMITH CR-2-3/4-XC Cam Follower and Track Roller - Stud Type | B:30 mm; r min.:2 mm; Basic static load rating (C0):217 kN; C:30 mm; Fw:107 mm; D:160 mm; Outer Diameter (mm):160; Weight:2,44 Kg; Bearing number:NUP218E; r1 min.:2 mm; |
| SMITH IRR-7/8 Roller Bearings | Brand:FAG; Y1:2,07; Width (mm):18; d:25 mm; D:52 mm; db min:28 mm; m:0,175 kg / Weight; c:9 mm; nB:4800 N / Fatigue lim; Size (mm):20x52x18; |
| SMITH PCR-1-1/8-E Ball Bearings | Characteristic cage frequency, FTF:0.38 Hz; snap ring included:With Snap Ring; a max:3.28 mm; overall width:25 mm; Db min:108 mm; Da max.:92 mm; fillet radius:1.5 mm; (Oil) Lubrication Speed:8 200 r/min; Characteristic inner ring frequency, BPFI:4.94 Hz; |