| SMITH MVYR-100 Cam Follower and Track Roller - Yoke Type | Bearing number:VKBA 1340; Designation SX:CX182; Designation Ruville:6908; Minimum Buy Quantity:N/A; Category:Bearings; Weight / Kilogram:0.71; Product Group:B00234; Manufacturer Name:SKF; Brand:SKF; Inventory:0.0; |
| SMITH CR-9/16 Cam Follower and Track Roller - Stud Type | Width (mm):1,5; Permissible sliding velocity v min.:0 m/s; Basic static load rating - radial direction C0:245 kN; d:26 mm; Specific static load factor K0:250 N/mm²; K:3,25 mm; Bore Diameter (mm):26; Ha:1 mm; Ha min.:1 mm; Coefficient of friction µ max.:0.25; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | d:279,4 mm; D:488,95 mm; Brand:NTN; Bearing number:EE295110/295193; Width (mm):120,65; B:120,65 mm; Outer Diameter (mm):488,95; C:92,075 mm; Size (mm):279.4x488.95x120.65; T:120,65 mm; |
| SMITH YAD-03 Cam Follower and Track Roller - Yoke Type | Shaft Size:5-7/16 in; Bearing - Housing - Seal:MSE507BRHKPS; Dimension B:11.0 in; Dimension H:2.4 in; Note:This product line wa; Maximum Speed:1450 rpm; Bearing Type:Split Cylindrical Re; Support Type:Take-Up; Dimension N:19.8 in; Seal Type:Kevlar Packing Seal; |
| SMITH BCR-1-1/4-B Cam Follower and Track Roller - Stud Type | D:36,512 mm; r2 min.:0,6 mm; Outer Diameter (mm):36,512; d:22,225 mm; Angle:6 °; Brand:NTN; Width (mm):19,431; Size (mm):22.225x36.512x19.431; Bore Diameter (mm):22,225; Weight:0,086 Kg; |
| SMITH MPCR-30 Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):30; a:2.06 mm; Fillet Radius/Chamfer:0.6 mm; ra:0.6 mm; Bore Size:10 mm; Basic dynamic load rating (C):7,3 kN; B:14.3 mm; r min.:0.6 mm; Bearing number:5200NR; Snap Ring Width:1.1 mm; |
| SMITH MCR-13-SBC Cam Follower and Track Roller - Stud Type | Size (mm):40x68x15; Angle (α):15 °; Bore Diameter (mm):40; Width (mm):15; d:40 mm; Basic dynamic load rating (C):20,5 kN; a:14,8 mm; Weight:0,247 Kg; Bearing number:7008 C; Brand:CX; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Brand:NSK; Weight:0,05 Kg; Basic dynamic load rating (C):34 kN; C:28,58 mm; Bearing number:B-1418; D:28,575 mm; Outer Diameter (mm):28,575; Width (mm):28,58; Fw:22,225 mm; Bore Diameter (mm):22,225; |
| SMITH YAS-10 Cam Follower and Track Roller - Yoke Type | Da(max):65.5; Basic static load rating (C0):50.2 kN; (Grease) Lubrication Speed:9300 r/min; dd(min):-; ra(max):1; r min.:1.1 mm; r1(min):0.6; Grease lub.:9300; r1 min.:0.6 mm; Db(min):-; |
| SMITH BCR-1-1/2-X Cam Follower and Track Roller - Stud Type | Y2 - ISO Factor10:3.02; D:16.9970 in; Bearing Weight:185.60 lb; T - Bearing Width across Cups:5.7188 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:49700 lbf; Cone Part Number:HM252340D; R - Cone Frontface To Clear Radius1:0.140 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:587000 lbf; |