| No. | Brand | L | r | B | C | f | c | E | b |
| MFCR-200 | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | 1.5 | - | 38,1 mm | - | - | - | - |
| YR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| YR-1-5/8-X | SMITH | - | 0,4 mm | 11,1 mm | - | - | - | - | - |
| MCR-16-S | SMITH | - | - | 210,000 mm | 210,000 mm | - | - | - | - |
| IRR-3/4-3 | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-S | SMITH | - | - | - | - | - | - | - | - |
| MCR-35-SB | SMITH | - | 2,5 mm | - | - | - | - | - | - |
| BCR-1-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-40-SBC | SMITH | - | - | - | - | - | - | - | - |
| YAS-10 | SMITH | - | - | - | - | - | - | - | - |
| MCR-30-SB | SMITH | - | - | - | - | - | - | - | - |
| MPCR-100 | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/4-XC | SMITH | - | - | 250 mm | 250 mm | - | - | - | - |
| MPCR-30 | SMITH | - | - | 14.3 mm | - | - | - | - | - |
| CR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XC | SMITH | - | - | 30 mm | 30 mm | - | - | - | - |
| MCRV-52-SB | SMITH | - | - | - | 18 mm | - | - | - | - |
| MYR-12-S | SMITH | 100 mm | - | - | - | - | - | - | - |
| MUTD-45100 | SMITH | - | - | 109 mm | - | - | - | - | - |
| IRR-7/16 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-BC Cam Follower and Track Roller - Stud Type | Designation SX:CX135; Bearing number:4095; Brand:Ruville; Designation FAG:713650420; Compatibility:CITROEN / JUMPER I; Designation SNR:R140.95; Designation SKF:VKBA 3429; |
| SMITH CR-1-1/2-C Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):440; Bearing number:NNU 4888 K/W33; Width (mm):100; d:440 mm; Size (mm):440x540x100; Weight:50 Kg; C:100 mm; D:540 mm; (Grease) Lubrication Speed:990 r/min; Outer Diameter (mm):540; |
| SMITH FYR-3-1/4 Cam Follower and Track Roller - Yoke Type | Basic dynamic load rating (C):30,5 kN; Bore Diameter (mm):20; ra max.:1 mm; Weight:0,138 Kg; Size (mm):20x47x18; r min.:1 mm; Width (mm):18; Db max:42 mm; (Grease) Lubrication Speed:13 000 r/min; D:47 mm; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Brand:NSK; Weight:0,05 Kg; Basic dynamic load rating (C):34 kN; C:28,58 mm; Bearing number:B-1418; D:28,575 mm; Outer Diameter (mm):28,575; Width (mm):28,58; Fw:22,225 mm; Bore Diameter (mm):22,225; |
| SMITH CR-1-7/8-XB Cam Follower and Track Roller - Stud Type | Weight:1.050 kg; d:45 mm; Configuration:Double Row; B:25 mm; Limiting Speed - Oil:6,600 rpm; Center Guidance:Floating Steel Ring; ra (max):1.5 mm; Da (max):92 mm; Nr. of Holes:4; Bore Type:Cylindrical Bore; |
| SMITH MPCR-26 Cam Follower and Track Roller - Stud Type | B:28 mm; Width (mm):28; Size (mm):160x220x28; Angle (α):25 °; d:160 mm; Outer Diameter (mm):220; D:220 mm; Brand:NTN; Bearing number:2LA-HSE932ADG/GNP42; Bore Diameter (mm):160; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | d1:75.64 mm; Basic dynamic load rating - C:52.7 kN; Basic dynamic load rating C:52.7 kN; d2:87.6 mm; Mass complete bearing:1.2 kg; Hexagonal key size for grub screw - H:3 mm; d:61.912 mm; Hexagonal key size for grub screw N:3.05 mm; Calculation factor - f0:14; Calculation factor f0:14; |
| SMITH FCR-3 Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):168,275; Brand:INA; m:0,2 kg / Weight; Bearing number:CSCB060; C0r:10300 N / Static loa; d:6 inch; rmin:1 mm; D1:162,4 mm; D:168,275 mm; Cr:7000 N / Dynamic loa; |
| SMITH MCR-13-S Cam Follower and Track Roller - Stud Type | ra (max):3 mm; Enclosure:Open; Axial Load Factor Y0:2.32; Hole Diameter (do):10 mm; Retainer Material:Machined Brass; da (min):258 mm; B:120 mm; Configuration:Double Row; Dynamic Load Rating:2,630,000 N; Groove Width A:22 mm; |
| SMITH HR-1/2-C Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):721 kN; T:60 mm; Bearing number:30238 A; Brand:CX; D:340 mm; Weight:24 Kg; C:46 mm; Bore Diameter (mm):190; (Grease) Lubrication Speed:950 r/min; Outer Diameter (mm):340; |
SMITH MCRV-13-B Cam Follower and Track Roller - Stud Type Video
MCRV-13-B 凸轮从动件- Smith & 养贞交换图| 养贞足彩分析APP
MCRV-13-B 养贞和Smith型号对照表 ; 宽度（B）, 9 mm ; 螺柱直径（M）, 5 mm ; 螺柱长度（B1）, 13 mm ; 动态额定载荷(Cr), 4600 N ; (G1) 螺纹长度(mm), 7.5.
mcrv-13-b - Cam Follower and Track Roller - Lily Bearing Online
Specifications ; Category, Cam Follower and Track Roller - Stud Type ; UNSPSC, 31171530 ; Harmonized Tariff Code, 8482.40.00.00 ; Manufacturer Name, SMITH BEARING.Roller Width: 0.354 Inch | 9 MillimeterOther Features: Full ComplementSeal Type: OpenThread Size: M5X0.8
Stud Type SMITH MCRV-13-BC Cam Follower and Track Roller
d1 ≈: 439 mm ; Comparative radial load rating CF: 655 kN ; T: 161.925 mm ; B: 161.925 mm ; Calculation factor Y1: 1.6 ...
MCRV-13-B - Detail - Manufacturer of Smith Bearing Cam ...
Specifications: (D) Roller O.D. (mm), 13. (C) Roller Width (mm), 9. (d) Stud Dia. (mm), 5. (B1) Stud Length (mm), 13. (C) Basic Dynamic Load Rating (newtons) ...
SMITH Bearing of page 9 - NSK 6205du Bearing
SMITH MCRV-26-B Cam Follower and Track Roller - Stud Type: stud length: : 40.5 mm: bearing element: : Balls-Two Rows. SMITH MCRV-13-S Cam Follower and Track ...
MCRV-13-B Full Compliment Stud Type Hex Head Slot Metric ...
The MCRV-13-B is produced by Smith Bearings and is described as a MCRV-13-B Full Compliment Stud Type Hex Head Slot Metric Needle Bearing Cam Follower.
smith bearing mcrv-13-b - Cam Follower and Track Roller ...
13MM Roller Diameter; 9MM Roller Width; Crowned Roller Surface Profile; 5MM Stud Diameter; M5X0.8 Thread Size; Standard Stud Stud Profile; Open Enclosure; ...
MCRV-13-B Cam Followers - Smith & Lily Interchange - 养贞轴承
Smith Part No. MCRV-13-B. LILY Part No. LMCRV-13-B. Cross Reference, Smith. System of Measurement, Metric. Roller style, Stud Type. Roller Dia, 13 mm.
Metric Need Bearing Cam Follower, MCRV-13 - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCRV-13, MCRV-13 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...