| SMITH BCR-1-1/2-X Cam Follower and Track Roller - Stud Type | Y2 - ISO Factor10:3.02; D:16.9970 in; Bearing Weight:185.60 lb; T - Bearing Width across Cups:5.7188 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:49700 lbf; Cone Part Number:HM252340D; R - Cone Frontface To Clear Radius1:0.140 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:587000 lbf; |
| SMITH FYR-3-1/4 Cam Follower and Track Roller - Yoke Type | Basic dynamic load rating (C):30,5 kN; Bore Diameter (mm):20; ra max.:1 mm; Weight:0,138 Kg; Size (mm):20x47x18; r min.:1 mm; Width (mm):18; Db max:42 mm; (Grease) Lubrication Speed:13 000 r/min; D:47 mm; |
| SMITH HR-2-3/4-XC Cam Follower and Track Roller - Stud Type | Thread G:M140x2; D3:180 mm; L:131.00 mm; Locknut:KM28; C:24 mm; Appropriate Hydraulic Nut:HMV28; Weight:5.55 Kg; d1:125.00 mm; Lockwasher and Lockplates:MB28; |
| SMITH YR-2-1/2 Cam Follower and Track Roller - Yoke Type | Da max.:30 mm; Basic static load rating (C0):2,64 kN; Bearing number:6804-2NSE; D:32 mm; d:20 mm; Outer Diameter (mm):32; Size (mm):20x32x7; da min.:22 mm; Basic dynamic load rating (C):4 kN; ra max.:0.3 mm; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | d:279,4 mm; D:488,95 mm; Brand:NTN; Bearing number:EE295110/295193; Width (mm):120,65; B:120,65 mm; Outer Diameter (mm):488,95; C:92,075 mm; Size (mm):279.4x488.95x120.65; T:120,65 mm; |
| SMITH BCR-1-7/8-B Cam Follower and Track Roller - Stud Type | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:7780 lbf; G2 - Heat Generation Factor (Rib-Roller End):8; R - Cone Backface To Clear Radius3:0.03 in; Design Units:Imperial; da - Cone Frontface Backing Diameter:1.44 in; Cage Type:Stamped Steel; a - Effective Center Location4:-0.37 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:30000 lbf; G1 - Heat Generation Factor (Roller-Raceway):19.3; |
| SMITH HR-1-1/4-XC Cam Follower and Track Roller - Stud Type | Brand:CYSD; Bore Diameter (mm):65; Width (mm):13; Weight:0,22 Kg; r min.:1 mm; Basic dynamic load rating (C):17,5 kN; D:90 mm; d:65 mm; Outer Diameter (mm):90; Size (mm):65x90x13; |
| SMITH MVCR-100 Cam Follower and Track Roller - Stud Type | f0:8.4; da(min):55.5; ra max.:1 mm; da min.:55.5 mm; (Grease) Lubrication Speed:17000 r/min; Angle (α):15 °; r1 min.:0.6 mm; C0r:7.85; r1(min):0.6; a:16.7 mm; |
| SMITH CR-5/8-A-X Cam Follower and Track Roller - Stud Type | D:260 mm; Size (mm):180x260x128; r min.:1,1 mm; Bore Diameter (mm):180; Outer Diameter (mm):260; Brand:LS; Weight:26,7 Kg; d:180 mm; Width (mm):128; C:122 mm; |
| SMITH BCR-2-1/4-XBC Cam Follower and Track Roller - Stud Type | SREX:0.03; maximum temperature:120 °C; C:38,1 mm; Bearing number:5213; r:1.5; Outer Diameter (mm):120; fillet radius:1.5 mm; D_:120; r min.:1,5 mm; SREN:0; |