| SMITH MVCR-100 Cam Follower and Track Roller - Stud Type | f0:8.4; da(min):55.5; ra max.:1 mm; da min.:55.5 mm; (Grease) Lubrication Speed:17000 r/min; Angle (α):15 °; r1 min.:0.6 mm; C0r:7.85; r1(min):0.6; a:16.7 mm; |
| SMITH HR-2-1/4-C Cam Follower and Track Roller - Stud Type | Z:138 mm; La:785 mm; Outer Diameter (mm):838,1; d0:828 mm; Li:698 mm; Weight:59 Kg; da:742,5 mm; Brand:INA; Bore Diameter (mm):672; Di:745,5 mm; |
| SMITH CR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | Clearance:C3; Outside Ring Width B:13.000 mm; Bore Size d:55 mm; Features:Contact Seals; Oil Limiting Speed:9600 rpm; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:16.6 kN; Outside Diameter D:80.000 mm; C0r - Static Load Rating:14.1 kN; Grease Limiting Speed:8100 rpm; |
| SMITH IRR-1-1/4-4 Roller Bearings | Bearing number:RXLS 5.1/2; d:139,7 mm; C:25,4 mm; B:25,4 mm; D:190,5 mm; Width (mm):25,4; Brand:SIGMA; Bore Diameter (mm):139,7; Size (mm):139.7x190.5x25.4; Outer Diameter (mm):190,5; |
| SMITH CR-1-BC Cam Follower and Track Roller - Stud Type | Designation SX:CX135; Bearing number:4095; Brand:Ruville; Designation FAG:713650420; Compatibility:CITROEN / JUMPER I; Designation SNR:R140.95; Designation SKF:VKBA 3429; |
| SMITH HR-1-7/8-XC Cam Follower and Track Roller - Stud Type | Bearing number:USPF205; Basic dynamic load rating (C):14 kN; A1:4 mm; Weight:0,4 Kg; J1:76 mm; B1:27 mm; s:7,5 mm; A:8,7 mm; d:25 mm; D1:34 mm; |
| SMITH MCR-80-C Cam Follower and Track Roller - Stud Type | Shaft Tolerance:0.0020 in; Locking Style:Single V-Lock; Eng Internal Radial Clearance - Max:0.0047; Eng Internal Radial Clearance - Min:0.0037; Dimension RV:0.13 in; Dimension L Exp:3.50 in; Y2 - Geometry Factor:4.48; Dimension D:6.630 in; Engineering Group:Mounted Bearing; Grease Lubrication - M/N Seal:1500 rpm; |
| SMITH FCR-2-3/4 Cam Follower and Track Roller - Stud Type | D:22 mm; Bearing number:S727 ACD/HCP4A; Da max.:19,6 mm; da min.:9,4 mm; Fatigue load limit (Pu):0,048; d:7 mm; r4 min.:0,2 mm; r1 min.:0,3 mm; ra max.:0,3 mm; Db max:20,2 mm; |
| SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type | Size (mm):120x180x85; r1 min.:1 mm; B:85 mm; Brand:NTN; C:70 mm; Width (mm):85; Bearing number:SA1-120B; d1:135,6 mm; r2 min.:1 mm; D:180 mm; |
| SMITH HR-1-3/4-BC Cam Follower and Track Roller - Stud Type | Bearing number:N 2320; B:73 mm; Size (mm):100x215x73; Brand:SIGMA; d:100 mm; Bore Diameter (mm):100; D:215 mm; Outer Diameter (mm):215; Width (mm):73; C:73 mm; |