No. | Brand | L | r | B | C | f | c | E | b |
CR-1-1/2-XBE | SMITH | - | - | - | 51 mm | - | - | - | - |
MFCR-200 | SMITH | - | - | - | - | - | - | - | - |
IRR-2-1/2-1 | SMITH | - | - | - | - | - | - | - | - |
HR-1-1/2-C | SMITH | - | - | - | 16 mm | - | - | - | - |
MCRV-52-SB | SMITH | - | - | - | 18 mm | - | - | - | - |
MCR-52-SBC | SMITH | - | - | - | - | - | - | - | - |
CR-5/8-A-X | SMITH | - | - | - | 122 mm | - | - | - | - |
YR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
MCR-30-SB | SMITH | - | - | - | - | - | - | - | - |
YR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
YR-1-1/4-X-SS | SMITH | - | - | - | - | - | - | - | - |
HR-1/2-C | SMITH | - | - | - | 46 mm | - | - | - | - |
MCR-62-C | SMITH | - | - | 120,65 mm | 92,075 mm | - | - | - | - |
DCR-1-1/2 | SMITH | - | - | - | 20 mm | - | - | - | - |
YR-3-1/2-X | SMITH | - | - | 28,575 mm | 28,575 mm | - | - | - | - |
MCRV-19-SC | SMITH | - | - | 37 mm | 37 mm | - | - | - | - |
FCR-2-1/2 | SMITH | - | 1,5 mm | 38,1 mm | - | - | - | - | - |
CR-7/8 | SMITH | - | - | - | - | - | - | - | - |
YR-2-C | SMITH | - | - | - | - | - | - | - | - |
BYR-1-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
HR-2-3/4-XC | SMITH | 131.00 mm | - | - | 24 mm | - | - | - | - |
HR-2-1/2-B | SMITH | - | - | 42 mm | - | - | - | - | - |
SMITH CR-4-X Cam Follower and Track Roller - Stud Type | B:250 mm; Basic dynamic load rating (C):6690 kN; D:1000 mm; d:750 mm; Width (mm):250; Size (mm):750x1000x250; Calculation factor (Y1):3,2; Bearing number:249/750-MB-W33; Bore Diameter (mm):750; r2 min.:6 mm; |
SMITH BYR-1-5/8 Cam Follower and Track Roller - Yoke Type | Da - max.:353 mm; Product Group:B04311; Internal Clearance:C0-Medium; bore type:Tapered 1:12; Withdrawal Nut:HM48T; Harmonized Tariff Code:84823080; Calculation factor - Y2:3.4; D:370 mm; fillet radius:3 mm; |
SMITH IRR-13/16-2 Roller Bearings | Design Units:Imperial; Bearing Weight:2.51 lb; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8390 lbf; Y1 - ISO Factor9:1.12; Cg - Geometry Factor11:0.0686; r - Cup Frontface To Clear Radius2:0.06 in; Ab - Cage-Cone Frontface Clearance:0.12 in; e - ISO Factor8:0.6; D:2.9375 in; Aa - Cage-Cone Backface Clearance:0.09 in; |
SMITH BCR-1-7/8-B Cam Follower and Track Roller - Stud Type | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:7780 lbf; G2 - Heat Generation Factor (Rib-Roller End):8; R - Cone Backface To Clear Radius3:0.03 in; Design Units:Imperial; da - Cone Frontface Backing Diameter:1.44 in; Cage Type:Stamped Steel; a - Effective Center Location4:-0.37 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:30000 lbf; G1 - Heat Generation Factor (Roller-Raceway):19.3; |
SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Dimension J1 :14-1/2 in; Dimension M :4-3/4 in; Shaft Size:4 in; Series Type:Light Series; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x 3/4; Seal Type:Viton Single Lip; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H :4-15/16 in; Dimension J2 :12-19/32 in; |
SMITH MVCR-100 Cam Follower and Track Roller - Stud Type | f0:8.4; da(min):55.5; ra max.:1 mm; da min.:55.5 mm; (Grease) Lubrication Speed:17000 r/min; Angle (α):15 °; r1 min.:0.6 mm; C0r:7.85; r1(min):0.6; a:16.7 mm; |
SMITH CR-1-1/2-XBE Cam Follower and Track Roller - Stud Type | d:200 mm; S:7 mm; Reference speed:2400 r/min; Basic static load rating (C0):570 kN; D1:269 mm; r4 min.:2,1 mm; Bearing number:NU1040ML; Brand:SKF; Basic dynamic load rating (C):380 kN; C:51 mm; |
SMITH HR-2-3/4-XB Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):200; D:200 mm; Bore Diameter (mm):130; Width (mm):52; (Grease) Lubrication Speed:1700 r/min; Size (mm):130x200x52; Bearing number:23026; B:52 mm; Basic dynamic load rating (C):377 kN; Brand:FBJ; |
SMITH IRR-1-1/16 Roller Bearings | C:48 mm; D:84 mm; Outer Diameter (mm):84; d:49 mm; Width (mm):48; Size (mm):49x84x48; Brand:Timken; Bearing number:JXP25469CA-92UA7; B:48 mm; Bore Diameter (mm):49; |
SMITH IRR-1-2 Roller Bearings | Brand:NACHI; B:51.6 mm; Bolt (G):M16; S:19 mm; d:50 mm; H1:22 mm; Bore Diameter (mm):50; A:55 mm; Width (mm):51.6; J:159 mm; |
SMITH CR-2-1/4-XBC Cam Follower and Track Roller - Stud Type Video