| SMITH CR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | Width (mm):36; Weight:2,8 Kg; S2:1,7 mm; r1 min.:2 mm; Outer Diameter (mm):150; Basic dynamic load rating (C):315 kN; da max:120 mm; Bearing number:C2217KV; D1:133 mm; ra max.:2 mm; |
| SMITH YAG-16 Cam Follower and Track Roller - Yoke Type | Calculation factor (Y0):3,6; C:31 mm; Calculation factor (kr):0,045; Size (mm):70x125x31; Width (mm):31; Weight:1,45 Kg; d2:81,4 mm; Outer Diameter (mm):125; Brand:SKF; Basic dynamic load rating (C):35,8 kN; |
| SMITH CR-9/16-XB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):15,2 kN; Bc:13 mm; Brand:Timken; Ew:37 mm; Outer Diameter (mm):37; Weight:0,018 Kg; (Grease) Lubrication Speed:8700 r/min; Bearing number:K32X37X13; Bore Diameter (mm):32; Fw:32 mm; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Brand:NSK; Weight:0,05 Kg; Basic dynamic load rating (C):34 kN; C:28,58 mm; Bearing number:B-1418; D:28,575 mm; Outer Diameter (mm):28,575; Width (mm):28,58; Fw:22,225 mm; Bore Diameter (mm):22,225; |
| SMITH YAT-12 Cam Follower and Track Roller - Yoke Type | Size (mm):500x620x56; B:56 mm; Outer Diameter (mm):620; Brand:NKE; Weight:37,5 Kg; r2 min.:3 mm; Basic dynamic load rating (C):313 kN; d:500 mm; r1 min.:3 mm; Basic static load rating (C0):544 kN; |
| SMITH HR-2-3/4-XC Cam Follower and Track Roller - Stud Type | Thread G:M140x2; D3:180 mm; L:131.00 mm; Locknut:KM28; C:24 mm; Appropriate Hydraulic Nut:HMV28; Weight:5.55 Kg; d1:125.00 mm; Lockwasher and Lockplates:MB28; |
| SMITH IRR-2-1/2-1 Roller Bearings | Thread (G):M18x1,5 Tolerance 6g; d2 max.:47 mm; l2 max.:97 mm; Angle:15 °; Basic dynamic load rating (C):26 kN; dk:31,7 mm; Brand:SKF; d:18 mm; Weight:0,26 Kg; C1 max:16,5 mm; |
| SMITH YAD-03 Cam Follower and Track Roller - Yoke Type | Shaft Size:5-7/16 in; Bearing - Housing - Seal:MSE507BRHKPS; Dimension B:11.0 in; Dimension H:2.4 in; Note:This product line wa; Maximum Speed:1450 rpm; Bearing Type:Split Cylindrical Re; Support Type:Take-Up; Dimension N:19.8 in; Seal Type:Kevlar Packing Seal; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | Total Length L:209.6 mm; Bolt Hole Width N:19.00 mm; Bearing Number:G1107KRRB; Bearing Type:Ball Bearing; Dimension B1:2.016 in; Center of Bearing from End S:18.7 mm; Dimension T:1.315 in; Inside Ring Width B:=Bearings1_Inside Ri; Dimension L1:69.9 mm; Shaft Size d:1 7/16 in; |
| SMITH YR-2-1/2 Cam Follower and Track Roller - Yoke Type | Da max.:30 mm; Basic static load rating (C0):2,64 kN; Bearing number:6804-2NSE; D:32 mm; d:20 mm; Outer Diameter (mm):32; Size (mm):20x32x7; da min.:22 mm; Basic dynamic load rating (C):4 kN; ra max.:0.3 mm; |