| SMITH HR-5/8-B Cam Follower and Track Roller - Stud Type | Fillet Radius/Chamfer:1.1 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:5,600 rpm; Factor fo:14.0; Configuration:Single Row; Static Load Rating:17,900 N; da (min):47 mm; Radial Clearance:0.015 to 0.033 mm; Dynamic Load Rating:29,100 N; Da (max):73 mm; |
| SMITH BYR-1 Cam Follower and Track Roller - Yoke Type | C1(2) - Dynamic Radial Rating (Two-Rows):6770000 N; Bearing Weight:408.000 Kg; D:780.000 mm; Y1 - ISO Factor5:3.53; Design Unit:METRIC; B - Inner Ring Width:250 mm; Y2 - ISO Factor6:2.32; e - ISO Factor3:0.28; C0 - Static Radial Rating:13700000 N; R - Inner Ring To Clear Radius1:5.000 mm; |
| SMITH CR-3-1/2-XBE Cam Follower and Track Roller - Stud Type | a:4,3 mm; T:19,845 mm; Brand:ISO; Bearing number:14124/14276; B:19,583 mm; Width (mm):19,845; Outer Diameter (mm):69,012; D:69,012 mm; Bore Diameter (mm):31,75; C:15,875 mm; |
| SMITH YAD-14 Cam Follower and Track Roller - Yoke Type | Bore Diameter (mm):105; Ew:112 mm; B:20 mm; Width (mm):20; Bearing number:K105X112X20; Outer Diameter (mm):112; Fw:105 mm; Size (mm):105x112x20; Brand:ISO; |
| SMITH CR-1-3/4-BC Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):24; Minimum Buy Quantity:N/A; Cr:8100 N / Dynamic loa; Bore Diameter (mm):18; Weight / Kilogram:0; Category:Roller Bearings; Size (mm):18x24x12; Cur:1300 N / Fatigue lim; C - 12 mm / Tolerance: -0,3:12 mm / Tolerance: 0; |
| SMITH YAD-10 Cam Follower and Track Roller - Yoke Type | d:50.000 mm; Ab - Cage-Cone Frontface Clearance:2.29 mm; Cg - Geometry Factor:0.0885; Bearing Weight:0.70 Kg; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:16700 N; Cone Part Number:JM205149V; C1 - Dynamic Radial Rating (1 million revolutions)5:115000 N; Aa - Cage-Cone Backface Clearance:0.76 mm; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:85.10 mm; |
| SMITH MCR-85-SC Cam Follower and Track Roller - Stud Type | r2 min.:1 mm; b:4,8 mm; Da max.:67,4 mm; d:44,45 mm; b1:5 mm; M:4 mm; da min.:48,5 mm; Bearing number:GEZ112ES; dk:63,881 mm; Da min:60,7 mm; |
| SMITH BCR-1-1/2-X Cam Follower and Track Roller - Stud Type | Y2 - ISO Factor10:3.02; D:16.9970 in; Bearing Weight:185.60 lb; T - Bearing Width across Cups:5.7188 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:49700 lbf; Cone Part Number:HM252340D; R - Cone Frontface To Clear Radius1:0.140 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:587000 lbf; |
| SMITH HR-1-3/4-X Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):500; B1:216 mm; T:224 mm; Width (mm):224; r min.:95 mm; Da(max):750; d:500 mm; r(min):9.5; (Refer.)Mass(kg):562; A:290 mm; |
| SMITH BCR-1-1/8-XC Cam Follower and Track Roller - Stud Type | Width (mm):192,000; Bearing number:23172VMKW33; Bore Diameter (mm):360,000; Outer Diameter (mm):600,000; H:192,000 mm; d:360,000 mm; Brand:SNR; D:600,000 mm; Size (mm):360x600x192; |