| SMITH HR-1-3/8-BC Cam Follower and Track Roller - Stud Type | Ab - Cage-Cone Frontface Clearance:0.07 in; K - Factor8:1.67; da - Cone Frontface Backing Diameter:1.28 in; Cg - Geometry Factor:0.0606; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:23400 lbf; C0 - Static Radial Rating:12100 lbf; Cone Part Number:15103; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:6080 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2090 lbf; |
| SMITH CR-9/16 Cam Follower and Track Roller - Stud Type | Width (mm):1,5; Permissible sliding velocity v min.:0 m/s; Basic static load rating - radial direction C0:245 kN; d:26 mm; Specific static load factor K0:250 N/mm²; K:3,25 mm; Bore Diameter (mm):26; Ha:1 mm; Ha min.:1 mm; Coefficient of friction µ max.:0.25; |
| SMITH BYR-1-3/4-XC Cam Follower and Track Roller - Yoke Type | Bearing number:625968; D:480 mm; Width (mm):350; Brand:NTN; Bore Diameter (mm):340; Size (mm):340x480x350; T:350 mm; d:340 mm; Outer Diameter (mm):480; |
| SMITH HR-1-3/4-X Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):500; B1:216 mm; T:224 mm; Width (mm):224; r min.:95 mm; Da(max):750; d:500 mm; r(min):9.5; (Refer.)Mass(kg):562; A:290 mm; |
| SMITH BCR-1-7/8-B Cam Follower and Track Roller - Stud Type | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:7780 lbf; G2 - Heat Generation Factor (Rib-Roller End):8; R - Cone Backface To Clear Radius3:0.03 in; Design Units:Imperial; da - Cone Frontface Backing Diameter:1.44 in; Cage Type:Stamped Steel; a - Effective Center Location4:-0.37 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:30000 lbf; G1 - Heat Generation Factor (Roller-Raceway):19.3; |
| SMITH MPCR-26 Cam Follower and Track Roller - Stud Type | B:28 mm; Width (mm):28; Size (mm):160x220x28; Angle (α):25 °; d:160 mm; Outer Diameter (mm):220; D:220 mm; Brand:NTN; Bearing number:2LA-HSE932ADG/GNP42; Bore Diameter (mm):160; |
| SMITH CR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | Width (mm):36; Weight:2,8 Kg; S2:1,7 mm; r1 min.:2 mm; Outer Diameter (mm):150; Basic dynamic load rating (C):315 kN; da max:120 mm; Bearing number:C2217KV; D1:133 mm; ra max.:2 mm; |
| SMITH YAD-12 Cam Follower and Track Roller - Yoke Type | Series:223K and 232K; D1:16.505 in; SNW/SNP Assembly Weight:135 lb; Diameter d :13 7/16 in; Lockwasher and Lockplates:P-72; Locknut:N-072; Bearing Number:23272K; Tolerance1:-0.007 in; Taper:1:12; B2:11.427 in; |
| SMITH FCR-3 Cam Follower and Track Roller - Stud Type | Outer Diameter (mm):168,275; Brand:INA; m:0,2 kg / Weight; Bearing number:CSCB060; C0r:10300 N / Static loa; d:6 inch; rmin:1 mm; D1:162,4 mm; D:168,275 mm; Cr:7000 N / Dynamic loa; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | B:109 mm; Size (mm):200x310x109; Bearing number:24040EK30; Basic static load rating (C0):2230 kN; Outer Diameter (mm):310; Calculation factor (Y1):1,95; Basic dynamic load rating (C):1640 kN; Calculation factor (Y0):1,91; (Oil) Lubrication Speed:1600 r/min; D:310 mm; |