| BEARINGS LIMITED 6302/C3 Single Row Ball Bearings | P180°:60.9 kN; Max. speed for Taconite seal:775 r/min; Initial grease fill:481.95 g; L:419.1 mm; H:239.316 mm; Appropriate attachment bolt size G:0.75 in; J min.:320.675 mm; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; J1:69.85 mm; |
| BEARINGS LIMITED D21 Thrust Ball Bearing | Grease Speed Rating n1:15000 rpm; Basic Static Radial Load Rating Co:6100 N; Basic Dynamic Radial Load Rating C:12700 N; Fillet Radius ra:1.00 mm; d:15.000 mm; B:13.00 mm; Oil Speed Rating n2:20000 rpm; Fillet Radius rb:0.60 mm; D:42.0000 mm; |
| BEARINGS LIMITED 14NBC2026YZP Bearings | Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:43000 N; Fillet Radius ra:2.00 mm; B:55.00 mm; D:160.0000 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:124000 N; Oil Speed Rating n2:4000 rpm; |
| BEARINGS LIMITED 62207-2RS Single Row Ball Bearings | d3 max.:279.527 mm; d:220 mm; d1:190.5 mm; G:219.151 mm; Threads per inch:8; B:32.004 mm; B4:35.712 mm; Sleeve:S 144x7.1/2; Lock washer:W 44; B1:183.566 mm; |
| BEARINGS LIMITED 6904 ZZ Ball Bearings | Basic Dynamic Radial Load Rating C:39300 N; d:45.000 mm; B:19.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; D:85.0000 mm; Grease Speed Rating Open/Shielded n1:6200 rpm; Basic Static Radial Load Rating Co:32500 N; Fillet Radius ra:1.00 mm; Accessories:Snap-Ring; |
| BEARINGS LIMITED 635 Ball Bearings | B:7.00 mm; Basic Dynamic Radial Load Rating C:4360 N; Accessories:One Seal; d:25.000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; D:37.0000 mm; Sealed Speed Rating n3:11000 rpm; Basic Static Radial Load Rating Co:2900 N; |
| BEARINGS LIMITED 2311 K Ball Bearings | P60°:94.3 kN; Cap bolt recommended tightening torque:515.2 N·m; Bearing:1317; H:222.25 mm; Mass pillow block:29.9 kg; PosiTrac Plus contact element (db shaft position):B10724-109; Appropriate attachment bolt size G:0.875 in; Labyrinth ring (dc shaft position):LOR 188; Ca:69.799 mm; h:47.625 mm; |
| BEARINGS LIMITED JM612949 Ball Bearings | Recommended tightening torque for grub screw:16.5 N·m; B4:6.75 mm; L:96 mm; A1:17 mm; Thread grub screw G2:M10x1; Recommended diameter for attachment bolts, inch G:0.5 in; s1:32.3 mm; J:130 mm; Housing:FYTBK 507; T:53.3 mm; |
| BEARINGS LIMITED HF 16 Bearings | d1:150 mm; Calculation factor Y0:2.8; Calculation factor Y1:2.9; da max.:191 mm; Da max.:249 mm; B4:28.5 mm; Limiting speed:2800 r/min; Calculation factor Y2:4.4; K:6 mm; Basic static load rating C0:1060 kN; |
| BEARINGS LIMITED UCPK205-16MM Ball Bearings | Grease Speed Rating n1:3200 rpm; d:75.000 mm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:1.50 mm; B:41.30 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:95600 N; Basic Static Radial Load Rating Co:88000 N; |