| 8 0270 04 Rollix Slewing Ring Bearings | ra (max):1 mm; D1 (max):87.9 mm; Snap Ring Width:1.1 mm; d:65 mm; Bore Type:Cylindrical Bore; b (min):1.3 mm; Fillet Radius/Chamfer:1 mm; Weight:0.210 kg; Factor fo:16.5; D:90 mm; Configuration:Single Row; Static Load Rating:16,000 N; Snap Ring Outside Diameter:94.4 mm; r1:0.5 mm; B:13 mm; a (max):2.1 mm; Radial Clearance:0.023 to 0.043 mm; da (min):70 mm; Limiting Speed - Grease:7,100 rpm; Enclosure:Snap Ring Groove wit; |
| 8 0675 Rollix Slewing Ring Bearings | Cg - Geometry Factor:0.113; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:50900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:113000 lbf; R - Cone Backface To Clear Radius3:0.13 in; Ab - Cage-Cone Frontface Clearance:0.05 in; B - Cone Width:2.3125 in; Aa - Cage-Cone Backface Clearance:0.18 in; da - Cone Frontface Backing Diameter:8.03 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:196000 lbf; |
| 1 0235 Rollix Slewing Ring Bearings | Dimension J:14.5 in; Seal Type:Felt Type; Cr - Dynamic Load Rating:131064 lbf; Bearing Number:LSM170ABR; Note:This product line wa; Cor - Static Load Rating:178049 lbf; Housing Width:6.8 in; Shaft Size:170 mm; Dimension H:8.386 in; Bearing - Housing - Seal:LSM170ABRH; Ca - Axial Load Rating:7419 lbf; Weight:262 lb; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:7.0 in; Dimension H2:16.9 in; |
| 6 0823 18 Rollix Slewing Ring Bearings | Weight:0.0120 Kg; Grease Limiting Speed:33000 rpm; Radius Rs min:0.300 mm; C0r - Static Load Rating:1.4 kN; Bore Size d:6 mm; Outside Diameter D:22.000 mm; Cr - Dynamic Load Rating:3.3 kN; Features:Shields; Oil Limiting Speed:39000 rpm; Outside Ring Width B:7.000 mm; |
| 121.45.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:45.200 kg; ra (max):3 mm; Limiting Speed - Grease:1,700 rpm; ra1 (max):3 mm; Radial Clearance:0.140 to 0.195 mm; B:92 mm; dd (min):247 mm; d:190 mm; r1:4 mm; Enclosure:Open; db (min):208 mm; Dynamic Load Rating:1,100,000 N; Da (max):322 mm; Static Load Rating:1,670,000 N; D:340 mm; Fillet Radius/Chamfer:4 mm; dc (min):234 mm; Limiting Speed - Oil:2,000 rpm; Configuration:Single Row; Bore Type:Cylindrical Bore; |
| 38 1091 01 Rollix Slewing Ring Bearings | B2:6.936 in; Tolerance1:-0.007 in; Series:230K; D1:15.005 in; Locknut:N-064; Bearing Number:23064K; Lockwasher and Lockplates:P-64; SNW/SNP Assembly Weight:65 lb; Diameter d :11 7/16 in; Sleeve:S-3064 x 11 7/16; Taper:1:12; S:1.791 in; |
| 121.50.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Dimension H2:7.1 in; Dimension H:3.150 in; Dimension M:2.8 in; Bearing - Housing - Seal:MSM50BRH; Series Type:Medium Series; Cr - Dynamic Load Rating:27202 lbf; Support Type:Two-Bolt Plummer Blo; Bearing Number:MSM50BR; Bearing Type:Split Cylindrical Re; Housing Width:4.4 in; Dimension H1:1.3 in; Ca - Axial Load Rating:1394 lbf; Cor - Static Load Rating:28551 lbf; Seal Type:Felt Type; Bearing UPC:013992034854; |
| 7 1385 03 Rollix Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway):18.4; Y - ISO Factor9:1.44; Da - Cup Frontface Backing Diameter:60.96 mm; Cg - Geometry Factor:0.0692; r - Cup Backface To Clear Radius2:0.51 mm; a - Effective Center Location3:-2.3 mm; d:38.000 mm; da - Cone Frontface Backing Diameter:42.42 mm; Cage Type:Stamped Steel; C0 - Static Radial Rating:55000 N; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0 mm; |
| 68460A Franke Slewing Ring Bearings | G2 - Heat Generation Factor (Rib-Roller End):21.4; Cg - Geometry Factor11:0.0984; da - Cone Frontface Backing Diameter:2.76 in; db - Cone Backface Backing Diameter:3.03 in; K - Factor7:1.45; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3970 lbf; C - Cup Width:0.7411 in; r - Cup Backface To Clear Radius2:0.050 in; C1 - Dynamic Radial Rating (1 million revolutions)5:22200 lbf; Cage Type:Stamped Steel; |
| 28 0641 01 Rollix Slewing Ring Bearings | T1 - Ring Thickness:27.79 mm; H - Shoulder Diameter - Shaft:787.4 mm; D1 - Small Diameter O.D.:812.80 mm; Limiting Speed:520 rpm; d1 - Large Bore I.D.:609.60 mm; Static Load Rating:16700 kN; B:101.727 mm; E - Shoulder Diameter - Housing:635.0 mm; Weight:89.6 Kg; r - Fillet Chamfer:6.4 mm; Dynamic Load Rating:3000 kN; Bearing Type:Thrust Cylindrical R; D - Bearing O.D.:812.800 mm; d - Bore Diameter:609.702 mm; |
| No. | Brand | D | k | s | i | T | E | A | H |
| 6 0574 09 | Rollix | - | - | - | - | - | - | - | - |
| 1 0947 | Rollix | 190 mm | - | - | - | - | - | - | - |
| 71041A | Franke | - | - | - | - | - | - | - | - |
| 34 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 6 2810 09 | Rollix | - | - | - | - | - | - | - | - |
| 28 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 23 0741 01 | Rollix | 140 mm | - | - | - | - | - | - | - |
| 34 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 21 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 26 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 32 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 36 0541 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 192.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 121.45.6000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 7 2810 09 | Rollix | - | - | - | - | - | - | - | - |
| 2 0720 02 | Rollix | - | - | - | - | - | - | - | - |
| 2 1715 | Rollix | 72.085 mm | - | - | - | - | - | - | - |
| 34 0841 01 | Rollix | 520 mm | - | - | - | - | - | - | - |
| 24 0741 01 | Rollix | 2.8750 in | - | - | - | - | - | - | - |
| 8 0574 08 | Rollix | 32 mm | - | - | - | - | - | - | - |
| 22 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 2202 | Rollix | - | - | - | - | - | - | - | - |
| 7 0489 11 | Rollix | - | - | - | - | - | - | - | - |
26 1091 01 Rollix Slewing Ring Bearings Video
26 CFR Ch. I (4–1–09 Edition) § 1.1091–1
May 18, 2009 — 26 CFR Ch. I (4–1–09 Edition). § 1.1091–1 ... §1.1091–1 Losses from wash sales of ... cause of the provisions of section 1091, no.
26 CFR 1.1091-1 - Losses from wash sales of stock or securities.
Title 26 - Internal Revenue Chapter I - INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) Subchapter A - INCOME TAX (CONTINUED) Part 1 ...
26 U.S.C. § 1091 - U.S. Code Title 26. Internal Revenue Code §
(a) Disallowance of loss deduction. --In the case of any loss claimed to have been sustained from any sale or other disposition of shares of stock or ...
Loss from Wash Sales of Stock or Securities 26 CFR 1.1091-1
Dec 21, 2007 — Section 1091(a) provides that in the case of any loss claimed to have been sustained from any sale or other disposition of shares of stock or ...4 pages
26 CFR § 1.1091-1 - Losses from wash sales of stock or ...
(a) A taxpayer cannot deduct any loss claimed to have been sustained from the sale or other disposition of stock or securities if, within a period beginning ...
26 CFR 1.1091-1 -- Losses from wash sales of stock or ... - eCFR
(a) A taxpayer cannot deduct any loss claimed to have been sustained from the sale or other disposition of stock or securities if, within a period beginning ...