| 25 0541 01 Rollix Slewing Ring Bearings | Bearing Type:Split Cylindrical Re; Bearing UPC:013992029874; Dimension R:7.1 in; Dimension H:2.2 in; Shaft Size:50 mm; Note:This product line wa; Seal Type:Felt Seal; Dimension T:8.5 in; Ca - Axial Load Rating:809.30 lbf; Bolt Size:4 x M12; Dimension N:5.375 in; Cr - Dynamic Load Rating:18659 lbf; Dimension V:0.1 in; Cor - Static Load Rating:19558 lbf; Maximum Speed:4630 rpm; Bearing Number:LSM50BR; |
| 121.36.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:2 mm; Cage Type:Stamped Steel; Db - Cup Backface Backing Diameter:75.95 mm; G2 - Heat Generation Factor (Rib-Roller End):16.7; a - Effective Center Location3:-2.3 mm; G1 - Heat Generation Factor (Roller-Raceway):35.6; C90 - Dynamic Radial Rating (90 million revolutions)4:25000 N; r - Cup Backface To Clear Radius2:1.52 mm; Bearing Weight:0.5 Kg; K - Factor7:1.34; Cone Part Number:JLM704649; |
| 8 0340 04 Rollix Slewing Ring Bearings | r1:2 mm; D:150 mm; Limiting Speed - Oil:4,500 rpm; db (min):95 mm; Da (max):140 mm; Static Load Rating:218,000 N; Configuration:Single Row; ra1 (max):2 mm; Fillet Radius/Chamfer:2 mm; Radial Clearance:0.075 to 0.110 mm; dc (min):104 mm; d:85 mm; ra (max):2 mm; Inside Ring Outside Diameter:101.8 mm; dd (min):110 mm; db (max):99 mm; B:36 mm; Dynamic Load Rating:170,000 N; Enclosure:Open; Limiting Speed - Grease:3,800 rpm; |
| 6 1790 09 Rollix Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:0.18 in; B - Double Cone Width:5.1250 in; d:12 in; Design Units:Imperial; R - Cone Frontface To Clear Radius2:0.130 in; db - Cone Backface Backing Diameter:12.8 in; Series:M257100; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:12.8 in; C0 - Static Radial Rating:477000 lbf; K - Factor7:1.76; Cg - Geometry Factor8:0.167; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:121000 lbf; |
| 12.50.3839.001.49.1502 Standard 5 Slewing Ring Bearings | d:19.0000 in; B - Double Cone Width:6.2500 in; Cone Part Number:LM272249DW; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:172000 lbf; Series:LM272200; C1 - Dynamic Radial Rating (1 million revolutions)1:380000 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:662000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:6040; Cg - Geometry Factor9:0.233; Ab - Cage-Cone Frontface Clearance:0.23 in; |
| 192.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | C - Cup Width:55 mm; Aa - Cage-Cone Backface Clearance:7.1 mm; da - Cone Frontface Backing Diameter:177.04 mm; Series:30330M; Y - ISO Factor9:1.74; G2 - Heat Generation Factor (Rib-Roller End):58; C0 - Static Radial Rating:1200000 N; d:150 mm; Design Units:METRIC; C1 - Dynamic Radial Rating (1 million revolutions)5:930000 N; db - Cone Backface Backing Diameter:182.88 mm; Db - Cup Backface Backing Diameter:288.04 mm; |
| 6 2002 Rollix Slewing Ring Bearings | Cy (max):6.1 mm; r1:0.5 mm; Bore Type:Cylindrical Bore; Dx (min):172 mm; Static Load Rating:65,500 N; Groove Diameter:155.2 mm; D:160 mm; Fillet Radius/Chamfer:2 mm; Configuration:Single Row; d:105 mm; Limiting Speed - Grease:4,000 rpm; Groove Width:3.1 mm; Weight:1.540 kg; B:26 mm; Factor fo:15.8; Dynamic Load Rating:72,500 N; Da (max):152 mm; da (min):113 mm; ra (max):2 mm; a (max):3.7 mm; |
| 1 088 Rollix Slewing Ring Bearings | D1:180 mm; D5:221 mm; E:20 mm; k:174.0 mm; t:2.5 mm; Weight:180 g; S:16 mm; D4:200 mm; No. of Tangs:19; Locknut:KML36; |
| 12.50.3739.001.49.1502 Standard 5 Slewing Ring Bearings | d:180 mm; Static Load Rating:117,000 N; B:33 mm; Weight:4.680 kg; Radial Clearance:0.053 to 0.102 mm; Da (max):242 mm; Dynamic Load Rating:106,000 N; Limiting Speed - Grease:2,400 rpm; da (min):188 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; ra (max):2 mm; Limiting Speed - Oil:2,900 rpm; Fillet Radius/Chamfer:2 mm; Factor fo:16.5; Enclosure:Open; D:250 mm; |
| 1 0422 01 Rollix Slewing Ring Bearings | Full Timken Part Number:DVF15K065SB; Adapter Sleeve Axial Movement Max:0.03 in; Dimension F:6.63 in; Dimension S:2.87 in; Locking Style:Tapered Adapter; Grease Lubrication - B/C/O Seal:1300 rpm; Y2 - Geometry Factor:4.08; Y1 - Geometry Factor:2.74; Shaft Tolerance:0.0035 in; Pre Install Clearance Min:0.0037 in; Int Radial Clearance Reduction Max:0.0020 in; C - Dynamic Load (Basic):49900 lb; UPC Code:0883450006125; |
| No. | Brand | D | k | s | i | T | E | A | H |
| 2 2202 | Rollix | 170 mm | - | - | - | - | - | - | - |
| 191.50.6735.990.41.1502 | Standard 5 | 42 mm | - | - | - | - | - | - | - |
| 1 2040 03 | Rollix | 1.9352 in | - | - | - | - | - | - | - |
| 8 0823 08 | Rollix | - | - | - | - | - | - | - | - |
| 191.40.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 3 0980 02 | Rollix | - | - | - | - | - | - | - | - |
| 2 2618 | Rollix | - | - | - | - | - | - | - | - |
| 6 2500 01 | Rollix | 4.3750 in | - | - | - | - | - | - | - |
| 26 1091 01 | Rollix | 360 mm | - | - | - | - | - | - | - |
| 31 0641 01 | Rollix | 72.014 mm | - | - | - | - | - | - | - |
| 192.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 7 2810 09 | Rollix | - | - | - | - | - | - | - | - |
| 121.36.4250.990.41.1502 | Standard 5 | 61.999 mm | - | - | - | - | - | - | - |
| 73111L | Franke | 289.989 mm | - | - | - | - | - | - | - |
| 7 0380 01 | Rollix | 160 mm | - | - | - | - | - | - | - |
| 192.50.5000.990.41.1501 | Standard 5 | - | - | - | - | - | - | - | - |
| 121.32.4250.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 3 0600 02 | Rollix | - | - | - | - | - | - | - | - |
| 25 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 2 1565 02 | Rollix | - | - | - | - | - | - | - | - |
| 24 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 26 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 26 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 7 1997 04 | Rollix | - | - | - | - | - | - | - | - |
| 121.36.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
27 0941 01 Rollix Slewing Ring Bearings Video
Milwaukee 48-27-0941 :: BIT FLAT BORING 15/16 IN X 6 IN
This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long ...
Milwaukee 48-27-0941 Flat Boring Bit 15/16" x 6" | North Coast
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 15/16 in. x 6 in. flat boring bit. This premium quality flat ...Applications: For Bores Clean Holes At Any An...Dimensions: Diameter 15/16 Inch Flute Length ...Drilling Depth: 6 inManufacturer: Milwaukee Tool
Milwaukee Tool 48-27-0941 Milwaukee Flat Boring Drill Bits
Drill Bit Material: Steel ; Quantity: Sold individually. ; Notes: 6 in. in total length. ; Drill Bit Quantity: 1 ; Drill Bit Style: Flat spade.
26 0941 01 LILY Interchangeable From Rollix Slewing Ring ...
26 0941 01 Slewing Ring Bearings ; Inside Diameter Of Inner Ring, 834 mm ; Outside Diameter Of Outer Ring, 1048 mm ; Height Of Overall Bearing Assembly (H), 56 mm.
Milwaukee Electric Tool 48-27-0941 Milwaukee Stubby Flat ...
The patented cutting edge produces easier and faster wood boring over conventional models by having fast chip removal, which dissipates heat from the bit. The 1 ...
27 0941 01 - Slewing Ring Bearings Manufacturers Suppliers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.